Installing Drivers and Software | Siemens 620 instruction

Reinstallation of the Software

8.3Installing Drivers and Software

To install the drivers and software from the “Documentation and Drivers” CD supplied, proceed as follows:

SPlace the CD in the CD ROM drive.

SStart the Start programm on the CD.The Acrobat Reader is started by the CD.

SNavigate to the driver list (language, operating system and device dependent).

SPlease install the corresponding driver according to driver list.

Notice

When reinstalling Windows 98 and Windows 2000, make sure to install the chip set driver prior to the other drivers.

When reinstalling Windows NT, the Windows NT ServicePack has to be installed prior to all the other drivers. The Service Pack has to be reinstalled after a driver installation.

8.4Installing and Operating the Burner Software

A burner software is not installed in the delivery condition. You will find instructions on installing and operating the burner software on the supplied CD ROM for the burner software.

SIMATIC Box PC 620 Manual	8-11
A5E00131465-01

Image 181

Siemens 620 appendix Installing Drivers and Software, Installing and Operating the Burner Software

Contents

Appendix Box PC Qualified Personnel Safety GuidelinesCorrect Usage Trademarks Preface Where is this Manual Valid?Purpose of the Manual Certifications, Standards and Approvals Structure of the Manual Simatic Documentation on the Internet Further Support Available worldwide, around the clock Automation an Drives, Service & Support Vii Service & Support on the Internet Simatic Box PC 620 Manual A5E00131465-01 Table of contents Table of contents Guidelines for handling electrostatic sensitive devices ESD Current Requirement of the Components Maximum ValuesGlossar-1 Index Index-1 Simatic Box PC 620 Manual A5E00131465-01 Installation Safety InstructionsImportant Information Warnung Power Connection For the United States and Canada Country-Specific Information RepairsFor operation with 120 For operation with 240 Battery Low Voltage Directive EMC DirectiveField of Application Requirement For Application Requirements Emitted Interference Immunity Connecting Peripherals Observing the Setup GuidelinesDeclaration of Conformity ISO 9001 Certificate Security Certification for the USA, Canada and Autralia Australia Canada Transporting Transport Simatic Box PC 620 Manual A5E00131465-01 Overview of Chapter Welcome to the Simatic Box PCChapter You will find Port Side View PS/2 socket for connecting a PS/2 mouseInternal slots for expansion modules Connection for PC Cards type I/II/III You can connect an external VGA monitor to this connector Drive Side View Device Fan Drive Side View Bottom View Equipotential Grounding Bottom View Side View Front Ports PortsVGA Port 2 LS 240 Drive Depending on Device Configuration Disk Drive Depending on the Device ConfigurationDrives Types of Diskette Information on the LS240 Disk Drive Restrictions Handling Disks with the LS 240 DriveTools under Step Usage Notes for LS240 Superdisks Authorization with Authors WEmergency Removal CD ROM or CD RW/DVDCombo Drive Hard Disk DriveOperation Emergency removal Additional Software Backup Battery Chapter Overview Setting Up and Operating Simatic Box PCPROFIBUS/MPI Profibus Unpacking the Simatic Box PC Unpacking and Checking the Scope of DeliveryRecording the Serial Number and the Ethernet address SVP Installing the Simatic Box PC Instructions for wall and ceiling mounting 297.2 80.1 301 286 266 232 11.2 297.2 99.1 301 286 297.2 Setting Up and Operating the Simatic Box PC Position Fan Side Down Port Side Down Preparing for Operation Connection to the Power Supply Unit Switching off the Simatic Box PC Connecting and Switching on the Simatic Box PCEquipotential Measures Connecting the Printer to the Parallel Port Connecting Peripheral DevicesPrinter should also be switched off Risk of damage to the unit Connecting Monitors Connecting the Printer to the Serial Port Connecting a PS/2 Mouse Using a MouseConnecting a Serial Mouse PS/2 keyboard of your choice can be connected to the Box PC Connecting a PS/2 Keyboard 10 USB connection Connecting Devices to an USB Interface PC Cards Working with PC Cards Peak currents of 650 mA at 5 V based on 3 s are permitted Installing PC CardsExamples of Pcmcia cards connected to PC card interface for Dr. Neuhaus Configuring Interfaces with Line Current TTY, 20 mA Connecting the Simatic Box PC 620 to other Simatic S5Point-To-Point Connection Risk of damage Interface Link Connecting Adapter Cable Connecting the Simatic Box PC 620 via an Adapter Simatic Box PC 620 to PG Connection V.24, TTY Interface Link Connecting Cable Adapter Risk of damage to the Simatic Box PC 14 Connection Using the PROFIBUS/MPI Interface PROFIBUS/MPI Network Connecting Networking the Box PC on Profibus Networking the Simatic Box PC 620 with Other Stations onHow the Network Functions Hardware Requirements Connection under Windows Ethernet RJ45 Ethernet InterfaceNetworking Box PC via RJ45 Ethernet Interface What Does This Chapter Contain? Simatic Box PC 620 Expansions Limitation of Liability Opening the Unit Prerequisites Tools Before Opening the Unit Box PC 620 Prepared for Opening Opening the Simatic Box PC Components Components Visible After Opening the Unit Motherboard Components on the Motherboard Optional product featureNumber Functions Standard Memory Installing Memory Expansion SubmodulesMemory Modules Mbytes Installing the SO Dimm Cards Battery Power Supply for Real-Time Clock and Configuration Replacing the Backup BatteryBattery Voltage too Low Replacing tthe Battery Position of the Backup Battery Changing Setup A31 Installation of Expansion CardsC18 A31 Short PCI Cards 5 Slide elements are in the enclosed plastic bag 10 Removal/Installation of an Expansion Card Aligning the Holding-Down Device 11 Removal/Installation of an Expansion Card Removal and Installation of an Expansion Card 12 Installation and Removal of the Drive Holder 13 Hard Disk Drive with Holder Removed 14 Box PC 620 with CD ROM Drive Removal and Installation of a CD ROM Drive 15 Installation of the Floppy Disk Drive in the Box PC Removal and Installation of the Floppy Drive 16 Installation of the LS 240 Drive Removal and Installation of the LS 240 Drive 17 Removal and Installation of the Power Supply Unit Removal and Installation of the Power Supply Unit 18 Removal and Installation of the Bus Board Removal and Installation of the Bus Board 19 Fixing Screws on the Motherboard Removal and Installation of the Motherboard 20 Removal and Installation of the Device Fan Removal and Installation of the Device Fan 21 Changing the Processor Processor Change 22 Reset Button Reset Button Simatic Box PC 620 Manual A5E00131465-01 Configuring the Simatic Box PC Changing the Device Configuration with Bios Setup Selectable submenu Screen Display Following Power On Menu Meaning Menu Structure Main Menu Setting in the Main MenuField Meaning By submenus Diskette a Disk drive System Time und System Date Uhrzeit und DatumDate Type Field Multi Sector-Transfer Field Write Back Memory Cache Submenu QuickBoot Mode Enabled Boot Options Submenu Summary Screen NumLock Keyboard Features Submenu Entry Meaning Hardware Options SubmenuPCI-MPI/DP *1 Simultan CRT / LCD Advanced Menu Setting in the Advanced Menu DOS Submenu COM/LPT ConfigurationOther Settable Mode Features Output Only PCI Configuration SubmenuPrinter Port Internal LPT1 Bidirectional PCI Devices Submenu IRQ Available Submenu PCI/PNP ISA IRQ Resource Exclusion PCI IRQ line Field AGP Submenu Video Adapter SettingsPCI Summary Security Menu Was entered during system boot This menu has the following structure Power MenuAPM This menu allows you to prioritize the boot devices Boot Sequence Menu 19 Boot Sequence Menu Example Simatic Version Menu Exit Menu Setup program is always terminated using this menuExit Menu Documenting Your Device Configuration Default Setup SettingsSystemparameter Default Settings YourEntries IRQ3 IRQ4IRQ7 DMA Boot Sequence PowerSecurity Version Configuring the PC Card Error Diagnosis Error Display Problems When Using Modules from Other ManufacturersPC crashes during power up Cause Cause and Remedy Monitor Remains Dark No Mouse Pointer Appears on the Screen Screen Display Does not Appear or DriftsMouse pointer may not appear for the following reasons Mouse driver is not loaded USB-Device does not function Clock Time and/or the Date in Your PC Is Incorrect Error Messages An Error Message Appears on the ScreenError Message on the Screen Meaning/Suggestion Cmos Special codes Diagnostic Messages PortExample Beeps Hex-Code Display Meaning Description Hex Post codes in order of occurrence Tpquietbootstart TpconfigTpcacheconfig Tperrormsgs Tppmsetup TpenablenmiTpsetupchek Tperrorcheck Simatic Box PC 620 Manual A5E00131465-01 Hardware Information Basic System with Power Supply Unit 105W Basic System with Power Supply Unit 85WCurrent Requirement of the Components Maximum Values Component Voltage +5V +3.3V +12V Component/Port Description Parameters Overview of the Components and Ports System Resources Start Programs Accessories System Tools System InformationWindows Windows NT Meaning of the indicators is as follows Signals on the Front InterfaceMonitoring functions Overview Function Reaction Option Temperature Monitoring/Indication WD Reactions Watchdog WD FunctionWD Monitoring Times TWD Reaction Option SOM application is displayed Always Fan Monitoring External Ports Port Position Connector Description Serial Port COM1 PLC/V.24/Modem Line current TTY interface is an optional product featureSerial port COM 1 on the Box PC has the following pinout Pin No Designation Description Input /Output Serial Port COM2 V24/Mouse Gender Changer for COM1Serial port COM 2 on the Box PC has the following pinout Pin No Designation Description Input / Output Parallel port LPT 1 on the Box PC has the following pinout Parallel Port LPT1 PS/2 Keyboard PS/2 Mouse PortPin-No Designation Description Input / Output Universal Serial Bus ports have the following pinout USB PortVCC Pin No Designation Description Input/output PROFIBUS/MPI Socket Connector Is not necessary for data transfer Ethernet RJ45 Connection VGA socket connector on the Box PC has the following pinout VGA Socket Connector Display Port Cmos Assignment of the Front Ports on the Motherboard MSB Pin SignalVcon Enab Display Port Lvds Pin No Allocation of the Display to Display Select PinsDisplay type Port for Front Control Elements Internal Serial Port COM2 Assignment of the Internal Ports on the Motherboard Port to the Bus Unit Pin Row a Description Row B DC Port of the Power Supply Unit 85W Pin no Designation Description DC Port of the Power Supply Unit 105WP3V Assignment of the IDE Ports Port to the Floppy Disk Drive Meaning Pin X4/X3 Pin Pin No X31 Meaning Connection for LS240 Drive PS Connection for Hard Disk Connection for Backup BatteryConnection for CPU Fan Connection for Device Fan 10 Bus Board Bus Board Design and Mode of Operation Pin Designation Type ISA Slot Pin Assignment DACK0# MEMR# DRQ SBHE# MEMCS16#MEMW# DACK5# 5V System Environment PCI Slot Pin AssignmentSide B Side a 5V System Environment Side B Side a PCI Socket PCI Slot Shared ISA PCI Slot Pin No Assignment of the Slot Specific PCI Bus Signals Technical Specifications Power Supply with 85W power output AC and DCPower-Good-Signal Power-Good-Signal 12 Time Characteristics of the Power Good Signal Power Supply with 105W power output AC and DC Simatic S5 Connecting Cable Connecting CablesSimatic S7 Connecting Cable for MPI/DP Section Description Reinstallation of the Software Primary Partition Creating an Extended Partition Creating Partitions under Windows NT Creating Partitions under Windows Primary Partition, FAT32 File System Creating an Extended FAT 32 Partition Installing the Recovery CD for Microsoft Windows Installing the Windows Operating System Windows NT Installation Sequence Installing the Recovery CD for Microsoft Windows NT Installing the Recovery CD for Microsoft Windows Windows 2000 Installation Sequence Setting the Language Selection for Windows Installing and Operating the Burner Software Installing Drivers and Software Simatic Box PC 620 Manual A5E00131465-01 Guidelines for handling electrostatic Sensitive devices ESD Definition What does ESD mean? Charging Electrostatic charging Avoid direct contact Ensuring a good ground connection Technical Specifications Safety Technical Specifications of the Simatic Box PCGeneral Electromagnetic compatibility EMC Special Features Mechanical SpecificationsAmbient Conditions Motherboard Graphics Function Indicators LEDs on the DevicePorts Glossary-1 Glossary Acpi Authorization DisketteASCII-Editor AuthorsW Bios CD ROM Cursor ControllerCursor Control Dimm DVD Ethernet EideFile Formatting Html HMIHttp IDE IRQ InterfaceISA Jeida LED LCD MS-DOS Network PasswordOperating System Parallel Interface Pcmcia PCIPG Link PIC Power Management Power ButtonPlug and Play Profibus ROM RAMRTC SOM SetupStep TFT Svga URL USB TouchscreenUser Interface User program Warm Start Video AdapterWAV Windows W2k Write ProtectionAnother name for Windows Glossary-21 Simatic Box PC 620 Manual A5E00131465-01 Index-1 Index Index Index-3 Simatic Box PC 620 Manual A5E00131465-01