Siemens 620 appendix Boot Options Submenu, QuickBoot Mode Enabled

Configuring the SIMATIC Box PC 620

”Boot Options” Submenu

The following submenu appears when you select the option “Boot Options” in the main menu:

PhoenixBIOS Setup Utility

Main

Boot Options				Item Specific Help
QuickBoot Mode:	[		]
		Enabled		Allows the system to
				skip certain tests
SETUP prompt:	[Enabled]			while booting. This
				will decrease the
POST Errors:	[Enabled]
				time needed to boot
Floppy check:	[Disabled]			the system.
Summary screen:	[Enabled]

F1 Help ESC Exit

Select Item	+ / –	Change Values		F9	Setup Defaults
Select Menu	Enter	Select	Sub-Menu	F10	Save and Exit

Figure 5-5	”Boot Options” Submenu
Quick Boot		Some hardware tests are skipped to speed up the boot procedure.
Mode
SETUP prompt		The message PRESS <F2> to enter Setup appears at the bottom of the
		screen during the system run-up phase.
POST Errors		The boot process is stopped if an error is detected; you must press F1 to
		acknowledge. Enter “Disabled”to avoid the necessity of acknowledging
		errors, for example if no keyboard is connected.

5-10	SIMATIC Box PC 620 Manual
	A5E00131465-01