SIMATIC Box PC 620 Expansions

4.4.1Removal and Installation of the Device for Holding Down the modules

The device for holding down the modules is attached to the housing with a screw. It has three slits, through which the slide elements are inserted.

Proceed as follows:

1.Open the housing as described in Section 4.1.

2.Undo the fixing screw of the device for holding down the modules.

3.During assembly, ensure that the device for holding down the modules is resting on the guide on the housing.

Guide slits for slide elements

Fixing screw for device for

 

holding down the modules

Figure 4-10 Removal/Installation of an Expansion Card

Note

The slide elements are in the enclosed plastic bag.

4-14

SIMATIC Box PC 620 Manual

A5E00131465-01

Page 74
Image 74
Siemens 620 appendix Slide elements are in the enclosed plastic bag, Removal/Installation of an Expansion Card