
Setting Up and Operating the SIMATIC Box PC 620
3.2Installing the SIMATIC Box PC 620
The Box PC 620 can be operated in several fitting positions. It is particularly suitable for fitting in consoles, switch boards and control panels.
The Box PC 620 with AC power supply meets the requirements for a fire enclosure to EN60950. it can therefore be fitted without an additional fire enclosure.
The Box PC 620 with DC power supply is an open device (right device side); the- refore the mounting must meet the requirements of a fire enclosure.
Please note the following points when installing the PC:
SAvoid extreme ambient conditions as far as possible. Protect your PC from dust, moisture, and heat.
SKeep the PC out of direct sunlight.
SMount the PC as safely as possible to prevent any danger (for example, by falling over).
SThe clearance around the housing must be at least 100 mm at the front and rear, so that the PC is sufficiently ventilated.
SMake certain that the ventilation slots for the housing are not covered.
SObserve the permissible fitting positions without fail when installing the systems.
Warnung
! If the systems are installed in a
SIMATIC Box PC 620 Manual | |