SIMATIC Box PC 620 Expansions
4.5.2Removal and Installation of a CD ROM Drive
Depending on the device equipment, a CD ROM drive is installed in the Box PC.
1.Undo the 2 screws on the back of the housing.
2.Remove the cover of the CD ROM drive.
3.Undo the three screws which secure the CD ROM drive to the mounting.
4.Remove the CD ROM drive from the mounting and carefully pull off the data cable.
5.Proceed in the reverse order to fit the new drive.
Fixing screws for CD ROM cover | CD ROM drive with cover |
Figure 4-14 Box PC 620 with CD ROM Drive
SIMATIC Box PC 620 Manual | |
