
Configuring the SIMATIC Box PC 620
Screen Display Following Power On
With the default setting of your PC, the display shown below appears following
Phoenix BIOS 4.0
Copyright
All Rights Reserved.
SIMATIC Box PC 620 V02.01.02 CPU = PentiumIII 866MHz 637K System RAM Passed 119MB Extended RAM Passed 0128K Cache SRAM Passed System BIOS shadowed
Video BIOS shadowed
UMB upper limit segment address: ....
Fixed Disk 0: xxxx
ATAPI
Press <F2> to enter SETUP
If you press the F2 key while the above display is shown, you select the
The default settings are effective on delivery. You can change these settings using the BIOS setup. The modified settings become effective when you have
saved them and terminated the BIOS setup.
The following screen shots may differ from what is shown here, depending on the device configuration. The following screen form appears when you start the BIOS setup:
Header Menu bar
PhoenixBIOS Setup Utility
| Main | Advanced | Security Power | Boot Sequence | Version | Exit |
|
|
|
|
|
|
|
Selectable submenu
System Time: | [ | 15 | :35:32 ] |
System Date: | [ |
| 03/12/2002] |
Diskette A: | [1.44 MB, 31/2”] | ||
Primary Master | [20496 MB] | ||
Primary Slave | [None] | ||
Secondary Master |
| ||
Secondary Slave | [None] | ||
Memory Cache: | [Write Back] | ||
Boot Options |
|
|
|
Keyboard Features |
|
|
|
Hardware Options |
|
|
|
System Memory: |
| 640 KB | |
Extended Memory: | 121856 KB |
Item Specific Help
<Tab>,
Example:
Hour/Minute/Second
Month/Day/Year
Help window
Operation line |
| F1 | Help |
| ESC | Exit | |
|
Select Item | + / – | Change Values | F9 | Setup Defaults | |
Select Menu | Enter | Select | F10 | Save and Exit |
Figure 5-1 SETUP Main Menu (Example)
SIMATIC Box PC 620 Manual | |