Welcome to the SIMATIC Box PC 620

Additional Software

To be attain the full functionality of the CD RW/DVD ROM drive, additional soft- ware (DVD player or burner software) is necessary. You can find it on the CD inclu- ded in the delivery of the device. To install the software place the CD in the drive and follow the instructions on the screen.

2.7Backup Battery

A backup battery (3.6 V lithium battery) powers the hardware clock even after the programming device is switched off.

There is a battery on the motherboard in this device. Batteries may only be exchanged by technical personnel. Note the information in the documentation of the CPU module! Observe the local regulations on the disposal of special waste when disposing of dead batteries.

Caution

! There is the danger of an explosion if the battery is not exchanged as directed. Replace only with the same type or an equivalent type recommended by the manufacturer. Dispose of used batteries in accordance with the manufacturer’s instructions.

Warning

! Risk of severe personal injury or property damage, danger of release of harmful substances.

There may be a danger of explosion if the battery is not handled properly. Incorrect disposal of used batteries can cause the release of harmful substances.

Do not throw a new or discharged lithium battery into an open fire, do not solder onto the cell container. Do not recharge the battery, do not open the battery by force.

The correct lithium battery is available from Siemens (order no.: W79084-E1003-B1).

Return used batteries to the manufacturer/recycler or dispose of them according to local regulations.

2-12

SIMATIC Box PC 620 Manual

A5E00131465-01

Page 34
Image 34
Siemens 620 appendix Backup Battery, Additional Software