Siemens 620 appendix Setting in the Advanced Menu

Configuring the SIMATIC Box PC 620

5.1.2The Advanced Menu

Menu Structure

PhoenixBIOS Setup Utility

Main Advanced Security Power Boot Sequence Version Exit

Setup Warning

Setting items on this menu to incorrect values may cause your system to malfunction

COM/LPT Configuration

PCI Configuration

Installed O/S:	[ Other ]
Reset Configuration Data:	[ No ]
Floppy disk controller:	[Enabled]
Local Bus IDE adapter:	[Both]
Large Disk Access Mode:	[DOS]
Memory Gap at 15 Mbyte:	[Disabled]
Video Adapter Settings

Item Specific Help

Select the operating system installed

on your system which you will use most commonly.

Note: An incorrect setting can cause some operating systems to display unexpected behavior.

F1 Help ESC Exit

Select Item	+ / – Change Values		F9	Setup Defaults
Select Menu	Enter Select	Sub-Menu	F10	Save and Exit

Figure 5-9 “Advanced” Menu

Setting in the Advanced Menu

Installed O/S

Plug and Play means that all modules are automatically detected and installed, providing they support the Plug and Play functionality.

[other]	BIOS handles the entire Plug and Play capability,
	default configuration
[Win95], [Win98],	The operating system handles some of the Plug

[WinMe], [Win2000] and Play functions

Reset	[Yes]	All installations under Plug and Play are deleted and
Configuration		reconfiguration is triggered the next time the system
Data		boots. The entry is then reset to [No]. System
		components that do not support Plug and Play have
		to be entered manually.
Floppy Disk	[Enabled]	Floppy Disk Controller on the motherboard is
Controller		activated.
	[Disabled]	Floppy Disk Controller on the motherboard is
		deactivated (with LS 240 drive).

SIMATIC Box PC 620 Manual	5-15
A5E00131465-01