Samsung SC-D263 Viewing the Demonstration Demonstration, Initial Setting System Menu Setting

ENGLISH

Initial Setting : System Menu Setting

Viewing the Demonstration (Demonstration)

✤ The Demonstration function may only be used in the <Camera> mode without a tape	1
inserted in the Camcorder. ➥page 19
✤ Before you begin: Make sure that there is no tape inserted in the Camcorder. ➥page 32
✤ Demonstration automatically shows you the major functions that are included with your
Camcorder so that you may use them more easily.
✤ The Demonstration operates repeatedly until the Demonstration mode is switched Off.

PLAYER

	A
	R
CAM	E

PLA

Y

E

R

	A
E	R
CAM

1.Set the [Power] switch to [CAMERA].

2.Set the [Mode] switch to [TAPE]. (SC-D363/D364/D365/D366 only)

3.Press the [MENU] button.

■The menu list will appear.

4.Move the [Zoom] lever up or down to select <System>, then press the [OK] button.

5.Move the [Zoom] lever up or down to select <Demonstration>, then press the [OK] button.

6.Move the [Zoom] lever up or down to select <On>, then press the [OK] button.

7.Press the [MENU] button.

■The Demonstration will begin.

8.To quit the Demonstration, press the [MENU] button.

[ Notes ]

■The Demonstration function is automatically activated when the Camcorder is left idle for more than 10 minutes after switching to the <Camera> mode (if no tape is inserted in the Camcorder).

■If you press other buttons (FADE, MF/AF, PHOTO, EASY.Q) during the Demonstration mode, the demonstration stops temporarily and resumes 10 minutes later if you do not operate any other functions.

4 Camera Mode √System

Clock Set

	Remote		√On
	Beep Sound		√On
	Language		√English
	Demonstration		√On
	ZOOM Move	OK Select		MENU Exit
6	Camera Mode
	Back
	Clock Set
	Remote
	Beep Sound
	Language
	Demonstration		Off
			On
	ZOOM Move	OK Select		MENU Exit
7	SAMSUNG Camcorder is...

Demonstration

28