Samsung SC-D366 manual Connecting to a TV which has no Audio/Video Input Jacks, Playback, English

Playback

Connecting to a TV which has no Audio/Video Input Jacks

ENGLISH

✤You can connect your Camcorder to a TV through a VCR.

1. Connect the Camcorder to your VCR with the Audio/Video Cable or Multi Cable.

■ The yellow jack: Video

■ The white jack: Audio(L) - Mono

■The red jack: Audio(R)

VCR

Multi Cable

(SC-D362/D364/

D365/D366)

AV/ SCamcorder

2.	Connect a TV to the VCR.		TV
3.	Set the [Power] switch to [PLAYER].
4.	Set the [Mode] switch to [TAPE]. (SC-D363/D364/D365/D366 only)
5.	Turn on both the TV and VCR.		Antenna
	■	Set the input selector on the VCR to Line.
	■	Select the channel reserved for your VCR on the TV set.	VCR
6.	Play the tape.

Signal flow

Multi Cable

AV Cable

(SC-D263/D363)

Playback

1. Connect a power source and set the [Power] switch to [PLAYER].

2. Set the [Mode] switch to [TAPE]. (SC-D363/D364/D365/D366 only)

3. Insert the tape you wish to play back.

TV

AV

Signal flow

Camcorder

4. Using the [œœ (REW)] /[√√(FF)] buttons, find the first position you wish to play back.

Antenna

AV Cable

5.Press the [√/■ ■ (PLAY/STILL)] button.

■The images you recorded will appear on the TV after a few seconds.

■If a tape reaches its end while being played back, the tape will rewind automatically.

[ Notes ]

■The playback mode (SP/LP) is selected automatically.

■If the VCR has an S-Video input terminal, you may use the S-Video connector for better quality. (SC-D362/D364/D365/D366 only)

■The S-Video connector transmits video only. Connect audio cables for sound.

■If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L).

PLAYE

R

	A
	R
CAM	E

PLA Y E

R

	A
E	R
CAM

65