USB Interface (SC-D362/D363/D364/D365/D366 only)

ENGLISH

USB Interface (SC-D362/D363/D364/D365/D366 only)

Using USB Interface (SC-D362/D363/D364/D365/D366 only)

Transferring a Digital Image through a USB Connection

The Camcorder supports both USB 1.1 and 2.0 standards. (Depends on the PC specification)

You can transfer a recorded file on a Memory Card to your PC via a USB connection. (SC-D363/D364/D365/D366 only)

If you transfer data to a PC, you need to install the software (DV Driver, Video Codec, DirectX 9.0) supplied with the Camcorder.

USB Connection Speed depending on the System

High speed USB connection is supported by Microsoft (Windows) device drivers only.

Windows 98SE/ME - Full Speed USB

Windows 2000 - High speed USB on a system with Service Pack 4 or later installed.

Windows XP - High speed USB on a system with Service Pack 1 or later installed.

System Requirements

 

Windows System

 

 

Minimum

Recommended

CPU

Intel® Pentium III™, 600MHz

Intel® Pentium 4™ , 2GHz

OS(Operating System)

Windows® 98SE/ME

Windows® 2000/XP

Memory

128MB

512MB

HDD capacity

1GB or more

2GB or more

Resolution

1024 x 768 dots 24bit Color

1024 x 768 dots 24bit Color

USB

USB1.1

USB2.0 High Speed

USB is not available for Macintosh systems.

[ Notes ]

USB 2.0 works for removable disk and USB streaming functions.

On a slower PC than recommended, movie playback may not be smooth or video editing may take a long time.

On a slower PC than recommended, movie playback may skip frames or operate unexpectedly.

Intel® Pentium III™ or Pentium 4™ is a trademark of the Intel Corporation.

Windows® is a registered trademark of the Microsoft® Corporation.

All other brands and names are property of their respective owners.

Operations are not guaranteed for all of the recommended computer environments mentioned above.

Do not connect the Camcorder to a PC using both DV and USB cables. It may not operate properly.

In <M.Cam> or <M.Player> mode, be sure that the Memory Card is inserted into Camcorder before connecting USB cable. If no Memory Card or an unformatted Memory Card is inserted, PC will not recognize your Camcorder as a removable disk.

(SC-D363/D364/D365/D366 only)

USB Streaming requires Video Codec, DV Driver and DirectX 9.0.

If you disconnect the USB cable from the PC or the Camcorder during the data transfer, the data transfer will stop and the data may be damaged.

If you connect the USB cable to a PC using a USB HUB or with other devices at the same time, it may cause conflict and may not work properly. If this occurs, remove all other USB devices and try the connection again.

89

Page 93
Image 93
Samsung SC-D366 Using USB Interface SC-D362/D363/D364/D365/D366 only, USB Connection Speed depending on the System