Samsung SC-D364 Adjusting the LCD Bright/LCD Color during Playback, Adjusting the Volume

ENGLISH

Playback

Playing Back a Tape You have recorded on the LCD Screen

✤The Playback function and speaker works only in <Player> mode. ➥page 19

✤You can monitor the playback picture on the LCD Screen.

1.Set the [Power] switch to [PLAYER].

2.Set the [Mode] switch to [TAPE]. (SC-D363/D364/D365/D366 only)

3.Insert the tape you wish to view. ➥page 32

4.Open the LCD Screen.

■Adjust the angle of the LCD Screen and set the brightness or color if necessary.

5.Press the [œœ (REW)] button to rewind the tape to the starting point.

■To stop rewinding, press the [■ (STOP)] button.

■The Camcorder stops automatically after rewinding is complete.

6.Press the [√/■ ■ (PLAY/STILL)] button to start playback.

■You can view the picture you recorded on the LCD Screen.

■To stop the play operation, press the [■ (STOP)] button.

Adjusting the LCD Bright/LCD Color during Playback

✤You can adjust the LCD Bright/LCD Color during playback.

✤The adjustment method is the same procedure as used in <Camera> mode. ➥page 29

Adjusting the Volume

✤When you use the LCD Screen for playback, you can hear recorded sound from the built- in Speaker.

-Take the following steps to lower the volume or mute the sound while playing a tape on the Camcorder.

✤When sound is heard once the tape is in play, use the [Zoom] lever to adjust the volume. ■ A volume level display will appear on the LCD Screen.

■ Levels may be adjusted from anywhere between <00> to <19>.

■ If you close the LCD Screen while playing, you will not hear sound from the speaker.

✤When the AV cable is connected to the Camcorder, you cannot hear sound from the Built- In Speaker and cannot adjust the volume.

✤Volume control is disabled while PB Zoom is in use.

5 6

COLOR NITE

LIGHT STOP

QUICK

MENU

PLAY

√ SP 0:46:00:11 60min

[05] † …

58