Reinstallation of the Software
8.1Restoring the Hard Disk
8.1.1Creating Partitions under Microsoft Windows 98
After installing a new hard disk it is necessary to create partitions with the program “FDisk” when the partitions have errors or need to be changed.
Caution
By deleting or creating partitions or logical DOS hard drives all saved data is lost on the hard disk. All drives on the hard disk will be erased.
The hard disk is delivered with the following installed (only for Windows 98 variants):
–a partition of the PRI DOS type, FAT 32 system,
–a partition of the EXT DOS type, FAT 32 system.
To restore the partitions to their original condition, please proceed as follows:
Primary Partition
1.To boot from the Recovery CD proceed as follows: When the BIOS message
Press <F2> to enter Setup
appears on the screen press the ESC key. After initialization a boot menu to select the boot options is displayed.
2.Select “ATAPI CD ROM Drive”.
3.When “Microsoft Windows 98 Startup Menu” is displayed, select “2. Boot for FDISK, FORMAT or Windows Me Setup”.
4.Start the Microsoft Windows 98 hard disk configuration program using ”A:\>FDisk”.
In the dialog box for large disk support select “[ Y]” for Yes when prompted “Do you wish to enable large disk support (Y/N)...?” to create a FAT 32 partition.
5.Create a primary DOS partition with at least 4090 MB. When prompted “Do you want to use the maximum available memory for creating the primary DOS partition and do you want this partition to be activated?” select “[N]” for No for a FAT 32 partition and then enter the desired partition size, for example,
6100 MB.
SIMATIC Box PC 620 Manual | |
