Safety Guidelines
This manual contains notices intended to ensure personal safety, as well as to protect the products and connected equipment against damage. These notices are highlighted by the symbols shown below and graded according to severity by the following texts:
!
!
!
Danger
indicates that death, severe personal injury or substantial property damage will result if proper precautions are not taken.
Warning
indicates that death, severe personal injury or substantial property damage can result if proper precautions are not taken.
Caution
indicates that minor personal injury can result if proper precautions are not taken.
Caution
indicates that property damage can result if proper precautions are not taken.
Notice
draws your attention to particularly important information on the product, handling the product, or to a particular part of the documentation.
Qualified Personnel
Repair, maintenance and servicing of device only to be carried out by qualified personnel. Qualified persons are defined as persons who are authorized to commission, to ground and to tag circuits, equipment, and systems in accordance with established safety practices and standards.
Correct Usage
Note the following:
Warning
! This device and its components may only be used for the applications described in the catalog or the technical description, and only in connection with devices or components from other manufacturers which have been approved or recommended by Siemens.
This product can only function correctly and safely if it is transported, stored, set up, and installed correctly, and operated and maintained as recommended.
Trademarks
SIMATIC, SIMATIC HMI and SIMATIC NET are registered trademarks of SIEMENS AG.
Third parties using for their own purposes any other names in this document which refer to trademarks might infringe upon the rights of the trademark owners.
Copyright W Siemens AG 2002 All rights reserved | Disclaim of Liability | ||
The reproduction, transmission or use of this document or its | We have checked the contents of this manual for agreement | ||
contents is not permitted without express written authority. | with the hardware and software described. Since deviations | ||
Offenders will be liable for damages. All rights, including rights | cannot be precluded entirely, we cannot guarantee full | ||
created by patent grant or registration of a utility model or | agreement. However, the data in this manual are reviewed | ||
design, are reserved. | regularly and any necessary corrections included in | ||
Siemens AG | subsequent editions. Suggestions for improvement are | ||
welcomed. | |||
Organization Group Automation and Drives | |||
Siemens AG 2002 | |||
Division Systems Engineering | |||
Postfach 2355, D90766 Fürth | Technical data subject to change. | ||
|
|
| |
Siemens Aktiengesellschaft | A5E00131465 | ||
