Siemens 620 appendix Overview of the Components and Ports, Component/Port Description Parameters

Hardware Information

7.2Overview of the Components and Ports

Component/Port	Description		Parameters
Chipset	VIA PN133T	S	SDRAM
BIOS	Update via software	S	512K in 4 pages
CPU	Pentium III / Celeron (type FC-PGA370)	S	Upgradeable
		S	Multimedia support
		S On Board L2-Cache with 128 k/256 k
			/512 K
Memory	DIMM modules	S	Data capacity of 64 bits + ECC
	up to max. 256MB/DIMM	S	Modules with ECC possible
		S	3.3 V
		S SDRAM to PC100 specification
		S up to 128MBit chip size on the
			module
		S	66/100MHz bus speed
		S 2 DIMMs can be used
		S	easy to exchange
		S	variable from 64-512MB/DIMM
Graphics	UXGA LCD Controller on the AG Bus is	S	up to 32 Mbytes of SDRAM are part
	integrated Chip set (S3)		of the main memory and can be
			configured (8/16/32MB)
		S	CRT:
			up to1600x1200/85Hz 65536 colors
			with PC133 memory modules
			up to1280x1024/85Hz 65536 colors
			with PC100 memory modules
Hard Disk	ATA-33 mode	S	Ultra DMA capable
CD ROM	Master on secondary EIDE port	S	24 speed
CD RW/DVD	Master on secondary EIDE port	Multi Spin Writer Drive
		S Read: CD ROM, CD R 14-32 times,
			CD RW 8-20 times Speed, 8 times
		S Write: CD R 12 times,
			CD RW 10 times Speed
		suppors recording:
		S Disc at once, Track at once,
			Session at once, Packet writing
Floppy	Notebook port for 34 pin flat cable	S	1.44 MB
LS240	Slave on secondary EIDE port	S	1.44MB standard floppy disks
		S	120MB/240MB SuperDisk
Keyboard	Port for PS2 keyboard	S	Standard
Mouse	PS2 mouse port	S	Standard
Serial	COM1/25 pins	S	TTY *2 and V24
	COM2/9 pins.	S	Standard
TTY *2	Communication with SIMATIC S5-CPUs	S	Range up to 1000 m

SIMATIC Box PC 620 Manual	7-3
A5E00131465-01