Siemens 620 appendix Hardware Options Submenu, Entry Meaning, PCI-MPI/DP *1

Configuring the SIMATIC Box PC 620

”Hardware Options” Submenu

The following submenu appears when you select the “Hardware Options” field in the main menu:

			PhoenixBIOS Setup Utility
	Main
		Hardware Options				Item Specific Help
	PCI – MPI / DP:		[ Enabled ]			Enable or disable the
	Onboard Ethernet:		[Enabled]			PCI - Multi Point
						Interface (MPI/DP)
	Ethernet Address:		08000624xxxx
	LAN Remote Boot:		[Disabled]
	Cardbus/PCMCIA Slot:		[Enabled]
	SafeCard functions:		[Enabled]
	Legacy USB Support:		[Disabled]
	Fan Control:		[Enabled]
	CRT / LCD selection:		[SIMULTAN]
	LCD-Screensize:		[Expand]
	DSTN Contrast:		[154]
	PS/2 Mouse:		[Enabled]
	F1	Help	Select Item	+ / –	Change Values		F9	Setup Defaults
	ESC	Exit	Select Menu	Enter	Select	Sub-Menu	F10	Save and Exit
Figure 5-8	”Hardware Options” Submenu

The parameters of the interfaces present on the basic module are set here.

Entry

Meaning

PCI-MPI/DP *1	Enables the CP5611-compatible MPI/DP interface. The recourses are
	managed by the BIOS PCI plug and play mechanism.
On Board	[Enabled]	The ethernet port on the motherboard is enabled.
Ethernet	[Disabled]	The ethernet port on the motherboard is disabled.
Ethernet	The individual ethernet address is displayed here.
Address
LAN Remote	[Enabled]	Booting using a connected LAN is possible. The
Boot		respective boot source is displayed as
		Intel Boot-Agent in the boot sequence menu.
	[Disabled]	Booting using LAN is not possible.

*1 Optional product feature

SIMATIC Box PC 620 Manual	5-13
A5E00131465-01