Setting Up and Operating the SIMATIC Box PC 620
3.1Unpacking and Checking the Scope of Delivery
Unpacking the SIMATIC Box PC 620
Unpack your Box PC as follows:
1.Remove the Box PC from the packaging.
2.Do not throw the original packing away. Keep it in case you have to transport the unit again sometime in the future.
3.Please keep the documentation in a safe place. It is required during the initial start up and is part of the device.
4.Check the packing and its contents for any shipping or transport damage.
5.Check with the packing list to make sure no components are missing. Also check the accessory parts, which you can order separately.
6.Please inform your local dealer of any shipping or transport damages and of outstanding items indicated on the packing list.
Recording the Serial Number and the Ethernet address
7.Enter the serial number and the Ethernet address of your PC in the table below. You can find the serial number on the type label attached to the rear of the device. The Ethernet address can be found in the BIOS setup settings in the main menu under the ’Hardware Options’ function.
The device can precisely be identified with the help of these numbers in case of repairs or theft.
Enter the Microsoft Windows “Product Key” from the “Certificate of Authenticity”
8.Enter the Microsoft Windows “Product Key” from the “Certificate of Authenticity” (COA) in the table. You will find the “Product Key” on the device on the power supply unit covering. You need the Windows “Product Key” if you want to reinstall the operating system.
Serial number | SVP.. |
|
|
6ES... | |
|
|
Microsoft Windows Product Key |
|
|
|
Ethernet Address |
|
|
|
SIMATIC Box PC 620 Manual | |
