Welcome to the SIMATIC Box PC 620
2.2Drive Side View
1 | 2 | 3 |
54
Figure 2-2 Drive Side View
1Device Fan
Here are openings for device ventilation.
Caution
The air venting slots for outgoing air must not be obstructed. Otherwise, there is a risk of overheating.
2Type Label
You can find the order number and the serial number of your device on the type label.
3Floppy disk drive (LS240 as an alternative)
Depending on the device configuration a standard floppy disk drive (1.44 Mbytes) or an LS240 Super disk drive is installed. Floppy disks up to 1.44 Mbytes as well as Super disks up to 240 Mbytes can be used in LS240 drives.
4Front Ports
The front ports are located behind the cover below the floppy disk drive. They are used for connection of the following front elements:
SI/O port for the connection of front components
SLVDS display port
5Reset Button
The reset button can be actuated with a thin pen (e.g. an opened up paper clip). If you actuate, the button, a hardware reset is triggered. The PC restarts. Data loss is possible with a hardware reset.
SIMATIC Box PC 620 Manual | |
