Radio
This chapter explains how to listen to the radio.
Operation Flow
Radio Mode Display
1 Press [SRC] (Source) to select the radio mode.
2 Press [BAND] to select a band.
3 Select a station.
Frequency adjustment
[]] (TUNE): Lower
[[] (TUNE): Higher
Note: Hold down for 0.5 sec. or more and release for station search.
Preset station selection
[{] (P·SET: Preset): Lower preset number
[}] (P·SET: Preset): Higher preset number
Note: Direct selection can be executed with [1] to [6] buttons on remote control.
Band |
| Frequency |
|
|
|
|
|
|
Preset Number | Lights while receiving an FM stereo signal. |
Direct Memory
You can assign your favorite broadcasting station to the [D·M] button. As the result of doing that, your favorite broadcasting station can be received even if the unit is in the CD mode or other modes. (Default: FM 87.9 MHz)
Note: For the use of an FM transmitter, it is useful for users to register applicable frequencies on D·M (Direct Memory).
D•M station Calling
Press [D.M] (Direct Memory).
D•M station Setting
qSelect a station you would like to preset.
wHold down [D.M] (Direct Memory) for 2 sec. or more.
Note: If the unit is turned off during receiving a broad- casting station via D·M, the unit starts again receiving the broadcasting station via D·M by turning on the unit.
20
