HP General IO Connectivity manual Add/Modify PAD Support Server Remote to Local

		Configuration
		Configuring PAD Services
		SAM displays an object list that shows all remote systems currently
		configured for PAD terminal emulation.
Step	4.	Select Add from the Actions menu to configure PAD terminal emulation
		for an unlisted remote system, or highlight a remote system from the list
		and select Modify.
Step	5.	Enter or modify field values as required.
Step	6.	Click on Apply to apply the new settings and to add additional system
		connections. Click on OK to save changes and exit this dialog.
Step	7.	Select Exit from the List menu to return to the “X.25 PAD Services”
		dialog.
NOTE		If you enabled Reverse Charge Requested, you must also configure the
		PAD support server. See “Add/Modify PAD Support Server (Remote to
		Local)” for step-by-step instructions for configuring the PAD support
		server.
Step	8.	Select the next PAD service you need to configure from the list on the
		“X.25 PAD Services” dialog.
		Add/Modify PAD Support Server (Remote to Local)
		Follow the steps below to add or modify a PAD support server for a local
		terminal or system:
Step	1.	At the SAM main window, highlight “Networking and Communications”
		and select Open Item from the Actions menu.
Step	2.	At the “Networking and Communications” window, highlight X.25 PAD
		Services and select Open Item from the Actions menu.
Step	3.	Highlight Support Server and select Open Item from the Actions
		menu.
		SAM displays an object list that shows all terminals/systems currently
		configured for access via X.25.
Step	4.	Select Add from the Actions menu to configure a terminal/system that is
		not listed for access via X.25, or highlight a terminal/system from the list
		and select Modify.

Chapter 3 75