GE PMCS 6.11a, EPM5200P, EPM9450Q EPM 3710 Meter, Display Indication Parameters, Min/Max, Phase

EPM 3710 Meter

The large faceplate representation of the EPM 3710 provides the following animated functions:

Feature	Function
Display	Opens the tabular data window specified during wizard
Window	configuration and sets the view to the Monitoring page.
MIN/MAX	Open the tabular data window specified during wizard
Buttons	configuration and set the view to the Setup page.
PHASE	Rotates the left side of the display through eight sets of
Button	instantaneous values, as described in the table below.
FUNCTION	Rotates the right side of the display through 13
Button	accumulated values.

Table 7. EPM 3710 Faceplate animated functions.

The parameters displayed by the PHASE button are listed in the following table.

Display Indication	Parameters
A	Phase A current and line-to-neutral voltage
B	Phase B current and line-to-neutral voltage
C	Phase C current and line-to-neutral voltage
*	Average current and line-to-neutral voltage
A,	Phase A current and A-B line-to-line voltage
B,	Phase B current and B-C line-to-line voltage
C,	Phase C current and C-A line-to-line voltage
*,	Average current line-to-line voltage

The parameters displayed by the FUNCTION button are listed in the following table. If any of the import or export values are zero, they are not displayed and the next nonzero value is shown. When any of these parameters are displayed, the AMPS portion of the display window is used to allow display of the complete value.

80 PMCS Interface Toolkit