GE EPM9650Q, EPM5200P, EPM9450Q, EPM 7300, EPM 7700, PMCS 6.11a manual Click on Function, Select/Enter

POWER LEADER EPM

The large faceplate representation of the POWER LEADER EPM provides the following animated functions:

Click on...	Function
Display Window	Clicking on the display area opens the tabular data window
	specified during wizard configuration and sets the view to
	the Normal Metering page.
GE Logo	Clicking the GE logo opens the tabular data window
	specified during wizard configuration and sets the view to
	the Setup page.
SELECT/ENTER	Toggles the display between the normal and alternate lists
Button	of metering parameters.
SCROLL Buttons	Loop through all metered parameters for the current mode,
	displaying two values at a time. The down arrow scrolls
	down through the parameter list, with the new value
	appearing on the lower line of the display. The up arrow
	scrolls up through the parameter list with the new value
	appearing on the display’s upper line. Depending on
	whether the EPM has been configured as a Delta or Wye
	device, certain parameters display either line-to-line or
	line-to-neutral values.

Table 1. PLEPM Faceplate animated functions.

The electrical parameters and status information displayed by the EPM are listed below for both the normal and alternate scrolls. Note that the displayed parameters

68 PMCS Interface Toolkit