Local RTD Tab

369 Relay - Local RTD Tab

This tab displays information about any RTD temperature probes connected directly to the device. Information on this tab is only available if the RTD option is installed in the relay.

Information and alarm indication for each RTD is only available when that RTD is programmed for operation. If an RTD’s Application is set to "none" then all fields for that RTD display "N/A".

The hottest Stator RTD indicates which RTD is currently returning the highest temperature. This condition is indicated by red text in the Temperature field.

Only one alarm condition can be displayed at a time – highest priority alarms are displayed in the alarm indicator. For example, if a "High Alarm" was triggered and latched and the RTD value returned to the "Alarm Active" state, the "High Alarm" latched indicator would persist.

180

PMCS Interface Toolkit

Page 188
Image 188
GE EPM9650Q, EPM5200P, EPM9450Q, EPM 7300, EPM 7700, PMCS 6.11a, GEH-6513 manual Local RTD Tab