Reset
•WATT Hour
•VAR Hour
•VA Hour
If it is kilo volt inputs, the decimal placement is 2 (as shown in the screen); if kilo amp input the decimal placement is 3 and if mega watt input, it is 1.
Note: Configured is displayed in green, Enabled in red and Reset in Amber.
Setup Two Tab
The screen explains various parameters related to Limits and Triggers:
Brief explanation of each of the columns is described below
Column |
| Description |
Limit 1 | Limit 1 value for the Associated quantity (For example: Phase A Amps) | |
Trigger - Relay 1 | LED display in Amber color : Limit 1 of the associated value will trigger Relay 1. | |
| LED display in Gray color: | Limit 1 of the associated value will not trigger Relay 1. |
Trigger - Relay 2 | LED display in Amber color : Limit 1 of the associated value will trigger Relay 2. | |
| LED display in Gray color: | Limit 1 of the associated value will not trigger Relay 2. |
Limit 2 | Limit 2 value for the Associated quantity (For example: Phase A Amps) | |
Trigger - Relay 1 | LED display in Amber color : Limit 2 of the associated value will trigger Relay 1. | |
| LED display in Gray color: | Limit 2 of the associated value will not trigger Relay 1. |
Trigger - Relay 2 | LED display in Amber color : Limit 2 of the associated value will trigger Relay 2. | |
| LED display in Gray color: | Limit 2 of the associated value will not trigger Relay 2. |
Set Above/Below Limit 1 | LED display in RED color : Limit 1 of the associated value is Set for Above. | |
| LED display in Gray color: | Limit 1 of the associated value is Set for Below. |
Set Above/Below Limit 2 | LED display in RED color : | Limit 2 of the associated value is Set for Above. |
230 | PMCS Interface Toolkit |
