GE GEH-6513, EPM5200P, EPM9450Q, EPM 7300, EPM 7700, PMCS 6.11a manual Value Text Displayed Description

Feature	Function
LINE Buttons	Rotate among parameters within a page. Certain configurations
	or meter values may prevent display of all parameters within a
	page. The parameters in each page are listed in the table below.
Panel Display	Display animation that shows the status of the 269 Plus relay. If
Lights	a trip or alarm has occurred, auxiliary relay 1 or 2 is active. If the
	meter fails its self-test, the dark red square to the left of the label
	appears bright red.

Table 10. 269+ Faceplate animated functions.

The following table lists the pages that can be accessed with the PAGE buttons, with the parameters available in each page that can be accessed with the LINE buttons.

Page	Value	Text Displayed			Description
	1	PAGE 1: ACTUAL VALUES			Page header
		PHASE CURRENT DATA
	2	I1=xxx	I2=xxx		Phase current in amps; --- or RUN based on
		I3=xxx	(AMPS)---		motor status
	3	I(3 Ph avg.)=xxx		AMPS	Average phase current
		Max Stator RTD=xxx C			Hottest stator temperature
1	4	UNBALANCE RATIO (In/Ip)
		U/B=xx	PERCENT
	5	GROUND FAULT CURRENT			Units = *.1 if G/F CT
		G/F=xxx.0		AMPS	ratio = 2000:1
	6	ST/HR TIMERS (MIN)			Starts per hour
		xx xx xx xx xx
	7	TIME
		BETWEEN STARTS
		TIMER = xxx		MIN
	8	END OF PAGE ONE			Page footer
		ACTUAL VALUES
	1	PAGE 2: ACTUAL VALUES			Page header
		RTD TEMPERATURE DATA
	2	HOTTEST STATOR RTD
		RTD #xx = xxx
	3-12	RTD TEMPERATURE			Displays temperatures of RTDs #1-10
		RTD # xx = xxx
2	13	MAX STATOR SINCE LAST
		ACCESS: RTD #x = xxx DEGREES C
	14-17	MAXIMUM RTD #x TEMP SINCE			Displays #7-10 max
		LAST ACCESS: xxx DEGREES C
	18	CLEAR LAST ACCESS DATA?			Press STORE to clear; message changes to
		NO			YES
	19	END OF PAGE TWO			Page footer
		ACTUAL VALUES

88 PMCS Interface Toolkit