Line Tab
Universal Relay - Line Tab
The Line tab supports the D60, F30, F60, G60, L60, L90 and UR devices, and shows a variety of energy measurements and demand parameters for a selected source.
These values are displayed for up to six sources, which may be toggled between using the S1 - S6 buttons. The Clear Demand button clears the values for the selected source.
Line Tab
Displays (for Remote 1, Remote 2, Local, and Differential) the magnitude and angle on phase A, B, and C.
Also displays information on various Direct Inputs, L90 Channels 1 and 2, and Line Position and Line Zero values.
Control Functions
The Control Functions panel displays status (enabled/disabled) and allows control of various relay elements, for example 87L and 87PC protection elements. Elements are greyed out if not installed or applicable to the device type. Each element's may be enabled or disabled by clicking the button next to its name.
166 | PMCS Interface Toolkit |
