GE PMCS 6.11a, EPM5200P, EPM9450Q, EPM 7300, EPM 7700, GEH-6513, EPM9650Q Watt Hour VAR Hour VA Hour

Configuration

•Kilo Volt Inputs

•Kilo Amp Input

•Mega Watt Input

•Phase Reverse Limits

•Meter Setup

•Limits Set By

Relay 1 / Relay 2

•Phase Reversal

•Phase Imbalance

•Delay On

•Delay Off

Decimal Placement

•Volts Decimal Placement

This value decides the precision. User can change the values from 1 to 4.

•Amps Decimal Placement

This value decides the precision. User can change the values from 1 to 4.

•WATT Decimal Placement

•VOLTS Full Scale

If kilo volt inputs value is set then Voltage full-scale value is divided by 1000, showing the value in Kilo Volts.

•AMPS Full Scale

If kilo Amp inputs value is set then Amps full-scale value is divided by 1000, showing the value in Kilo Amps.

Reset

•WATT Hour

•VAR Hour

•VA Hour

Note: Configured is displayed in green, Enabled in red and Reset in Amber.

234 PMCS Interface Toolkit