SR469 Motor Management Relay
All six function buttons under the Info area are enabled for the SR469.
The SR469 Tabular Data Screen wizard has nine command buttons, described below.
Tab | Button | Function |
|
|
|
Metering | Reset Device | Issues a RESET command to the SR469 |
|
|
|
| Clear MWh and Mvarh | Clears these values from the SR469’s memory |
|
|
|
| Clear Peak Demand | Clears this data from memory |
|
|
|
Status | Motor Start/Motor Stop | Issues Motor Start or Motor Stop commands |
|
|
|
| Clear RTD Maximums | Resets the RTD Maximums data |
|
|
|
Trip | Clear Last Trip Data | Clears this data from memory |
|
|
|
I/O | Clear Analog Input | Clears this data from memory |
| Min/Max Data |
|
Maintenance | Preset Digital Counter | Allows presetting of digital counters. |
|
|
|
| Clear Trip Counters | Clears the trip count data from memory. |
|
|
|
Table 25. SR469 Tabular data screen commands.
See the SR469 Motor Management Relay manual (Chapter 5, Actual Values) for information on the display of data values under different device configurations. Values not configured for use are displayed as N/A.
Metering Tab
The Multilin SR469 Metering Values screen shows the metering values, for example, Amps A, Amps B and Amps C; and
184 | PMCS Interface Toolkit |
