GE EPM 7700, EPM5200P, EPM9450Q, EPM 7300, PMCS 6.11a, GEH-6513, EPM9650Q manual KW SWD Kvar SWD KVA SWD

Screen Selected	Description
7 - Per-Phase Minimums	•	Vln a Min; Vln b Min: n/a when Voltage Mode is DELTA
	•	Vln c Min: n/a when Voltage Mode is DELTA or SINGLE
	•	Vln Avg Min: n/a when Voltage Mode is DELTA
	•	Vll ab Min
	•	Vll bc Min; Vll ca Min; Vll Avg Min: n/a when Voltage
		Mode is SINGLE
	•	Ia Min; Ib Min
	•	Ic Min: n/a when Voltage Mode is SINGLE
	•	I Avg Min
8 - Per-Phase Maximums	•	Vln a Max; Vln b Max : n/a when Voltage Mode is
		DELTA
	•	Vln c Max: n/a when Voltage Mode is DELTA or SINGLE
	•	Vln Avg Max: n/a when Voltage Mode is DELTA
	•	Vll ab Max
	•	Vll bc Max; Vll ca Max; Vll Avg Max: n/a when Voltage
		Mode is SINGLE
	•	Ia Max; Ib Max
	•	Ic Max: n/a when Voltage Mode is SINGLE
	•	I Avg Max
9 - Power & Amp Demand	•	KW SWD; KVAR SWD; KVA SWD**
	•	KW PD; KVAR PD; KVA PD**
	•	KW Total; KVAR Total; KVA Total
10 - THD and K-Factor	•	V1 THD; V2 THD; V3 THD: n/a when Source is n/a
	•	I1 THD; I2 THD; I3 THD; I4 THD: n/a when Source is n/a
	•	I1 K Factor; I2 K Factor; I3 K Factor; I4 K Factor: n/a
		when Source is n/a

**NOTE: If the Sliding Demand Reset is initiated, or a SWD setup register is changed, SWD values are “N/A” in the meter until the number of sub-intervals specified in the #sub intervals setup register have expired. The 3D faceplate and Tabular wizard will display 0 for these values during this state.

86 PMCS Interface Toolkit