Universal Relay

The Universal Relay devices are a highly-flexible family of power management devices based on the concept of a backplane and CPU supporting a wide variety of plug-in modules. These modules provide metering, monitoring, protection and control functions, and other abilities.

A UR tabular wizard can display between one and eight screens of data – the number of screens is determined by the user during wizard configuration. There are a total of Twenty Three screens available, depending on the type of UR device connected. For example, the C30 device does not support any metering functions, so the metering an source tabs are not available for this device.

-----------------------------------------------------------------------------------------------------

The UR wizard supports connection to the PMCS Modbus and Ethernet servers and third party MMS servers. A UCA/MMS check box is provided on the wizard configuration dialog to correctly set up the Intouch tag names for use with MMS.

Special Note: UCA/MMS support for PMCS 6.11a is removed. Do notcheck this checkbox.

-----------------------------------------------------------------------------------------------------

Note: If WindowViewer is running when the wizard configuration dialog is called up, a message appears warning that any changes made to the UR wizard configuration will not take effect until WindowViewer is shut down and restarted. For example, if a user elects to change the number of tabs configured for a device, the changes will not be reflected in the runtime environment until WindowViewer is restarted.

In the following pages, each of the Tabular Data Screen Wizards’ tabs will be displayed and described.

150

PMCS Interface Toolkit

Page 158
Image 158
GE PMCS 6.11a, EPM5200P, EPM9450Q, EPM 7300, EPM 7700, GEH-6513, EPM9650Q manual Universal Relay