GE EPM9450Q, EPM5200P, EPM 7300, EPM 7700, PMCS 6.11a, GEH-6513 manual State Tag Default Value Color

Each "Alarm indicator" as defined by the Event Logger will appear to InTouch as a DDE Integer item which can have the following values/states:

State	Tag	Default
	Value	Color
Normal (no alarm)	10 - 19	Solid Gray
Alarm Active - Unacknowledged	20 - 29	Red Blinking
Alarm Active - Acknowledged	30 - 39	Solid Red
Alarm Reset - Unacknowledged	40 - 49	Solid Yellow
(alarm occurred but later went off before being
acknowledged)
Alarm Disabled	0	Dark Gray
(Event Logger has disabled this alarm indicator)

Each panel button displays one of five different colors, based on the states defined above. A fill color animation link controlled by an indirect integer tag is used to change colors. The fill color link is set as follows:

<= 9: Dark Grey

10 -> 19: Grey

20-> 29: Grey (will also have a flashing Red animation link)

30 -> 39: Red

>= 40: Yellow

28 PMCS Interface Toolkit