Min/Max Tab
EPM 7500/7600 Meter - Min/Max Tab
The Minimum/Maximum Values tab displays a variety of minimum and maximum values recorded by the EPM 7500/7600. Select Show Minimum or Show Maximum buttons to display either the minimum or maximum values for the displayed parameters. To reset all min/max values, select the Reset Min/Max button.
Min/Max values may be displayed for the following parameters:
Phase A, B, C, Neutral and Average Values
•Vln A, B: n/a when Voltage Mode is DELTA
•Vln C: n/a when Voltage Mode is DELTA or SINGLE
•Vln Avg: n/a when Voltage Mode is DELTA
•Vll AB
•Vll BC, CA, and Avg: n/a when Voltage Mode is SINGLE
•I A, B, Neutral, and Avg
•I C: n/a when Voltage Mode is SINGLE
•Total Harmonic Distortion – Voltage A, B, and C: n/a when Source is n/a.
•Total Harmonic Distortion – Current A, B, C, and Neutral: n/a when Source is n/a.
•K Factor A, B, C, and Neutral: n/a when Source is n/a.
Three-Phase Values
•Vab, Vbc, Vca
•Power Factor Lead Total: n/a when PF is Lagging
•Power Factor Lag Total: n/a when PF is Leading
•Voltage Unbalance
132 | PMCS Interface Toolkit |