Installation to Threaded Rod
2 Thread two 1/4-20 hex thin nylon-insert locknuts (not included) on two 1/4-20 threaded rods (not included) to the desired height of projector mount assembly. Attach projector mount assembly (A) to the two 1/4-20 threaded rods using two 1/4-20 hex thin nylon-insert locknuts as shown in figure 2.7 or figure 2.8.
| 1/4-20 THREADED ROD | |
| (NOT INCLUDED) | 1/4-20 THREADED ROD |
| |
| | (NOT INCLUDED) |
| 1/4-20 HEX THIN | 1/4-20 HEX THIN |
| NYLON-INSERT |
| NYLON-INSERT |
| LOCKNUT |
| LOCKNUT |
| (NOT INCLUDED) |
| (NOT INCLUDED) |
| |
A | A |
|
ARROW | ARROW |
INDICATES |
INDICATES | FRONT OF |
FRONT OF | MOUNT |
MOUNT | |
fig. 2.7 | 1/4-20 HEX THIN | 1/4-20 HEX THIN | fig. 2.8 |
NYLON-INSERT | NYLON-INSERT | |
| |
| LOCKNUT | LOCKNUT | |
| (NOT INCLUDED) | (NOT INCLUDED) | |
7 of 10 | ISSUED: 08-05-08 SHEET #: 056-9008-1 |
Visit the Peerless Web Site at www.peerlessmounts.com | For customer care call 1-800-865-2112 or 708-865-8870. |