NEC NP600CM manual Bb Aa Cc, Attaching Adapter Plate to Projector

Attaching Adapter Plate to Projector

3	Align shoulder on connection block opposite notch
	in adapter plate (AA). Attach adapter plate to

connection block from projector mount assembly (A) using two #10-32 x 3/8" serrated washer head socket pin screws (C) as shown in figure 3.1. Tighten using 4 mm allen wrench (B).

NOTCHINDICATES FRONTOFPROJECTOR

CONNECTIONBLOCK

SHOULDER

AA

C

fig. 3.1

4	Flip projector upside down and attach adapter plate (AA) using three serrated socket pin screws (BB) and retain-
	ing spacers (CC) as shown below. Tighten using 4 mm allen wrench (B).

NOTE: Retaining spacers (CC) go between the projector and adapter plate (AA).

BB

AA

CC

8 of 10 ISSUED: 08-05-08 SHEET #: 056-9008-1

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-865-2112 or 708-865-8870.