Miranda Camera Co KALEIDO-K2 Installing lexan on the MWA-TBA-G terminal block adapter

GUIDE TO INSTALLATION AND OPERATION

GPI inputs characteristics:

Signal: 64 short-to-ground inputs

Connector: DC-37S

GPI outputs characteristics:

Signal: 66 opto-isolated contact

closures

Connector: DC-37S

Characteristics: Max differential voltage: 12 VDC

Max sink current: 70 mA

Isolation voltage: 2500 VRMS

Figure 4.4.2.3 GPI connector pin-out

To facilitate cabling of the GPI inputs and outputs, a terminal block adapter is available separately (Miranda P/N 1377-9800-100). A double-sided lexan is provided to identify the terminals assignment for both input and output connectors. Place the lexan as indicated on figure below, and install cables and plug the adapter onto the connector.

Figure 4.4.2.4 Installing lexan on the MWA-TBA-G terminal block adapter

Kaleido K2 13