Evolve Communications RD5000 manual Getting Started, Activate Remote Control, Install Batteries

Getting Started

1. Activate Remote Control

Install Batteries

The battery cover is located on the back of the remote. Pay close attention to the direction of the batteries, making sure the poles (+ and -) are aligned as indicated in the battery compartment.

Remove battery case cover to install the batteries in the remote control:

1Press firmly on the arrow on the back of the remote to remove the battery cover.

2Insert four new 1.5-volt AA alkaline batteries, taking care to align the poles ( + and - ) as indicated in the battery compartment.

1.5-volt AA alkaline

3Close the battery cover.

	Note	A Low Battery icon	appears on the top of all display screens when
		the battery power is low.
	Note	The batteries in your GUIDE Remote* should last about three months,
		depending on how much you use it. If the remote will not be in use for three
		or more weeks, it is suggested that you remove the batteries to avoid
		damage to the remote.
	Note	Your remote will not lose its device settings when you remove and reinstall
		batteries. However, you will need to either sync your remote or set the time
		and date manually (see page 42) for your remote to work properly.
8	Activate Remote Control		*Trademark