Evolve Communications RD5000 manual Test the CHAN+ / CHAN- key, To step, Key. repeat step

Getting Started

9	Read and follow the
	instructions on the screen
	and press the Right Arrow
	key to continue.
	Test the CHAN+ / CHAN- key
10
	to see if your TV tunes
	channels properly.
	Press the Right Arrow key
	when you are finished testing.
	If your TV tunes channels
11
	properly, highlight Yes and
	press the SELECT key. (go
	to step 12)
	If your TV does not tune
	channels properly,	highlight
	No and press the	SELECT

			key. (repeat step 10)
		Note	Depending on your device you might need to test several tuning methods to
			find the correct one.
			DirecTune setup is complete.
	12
			Press the Right Arrow key.
		Note	If you experience problems tuning channels after you set up DirecTune* , you
			should first try changing the DirecTune Speed in: Main Menu > Remote
			Settings > Advanced Settings > Adjust DirecTune Speed (see page 53).
			If this doesn’t work then try changing the DirecTune Method in: Main Menu
			> Remote Settings > Advanced Settings > Adjust DirecTune Method
			(see page 51).
24 Setup DirecTune			*Trademark