AXIS 5400 User’s Manual | Section 9: Management & Configuration |
|
|
Using HP Administration Tools
The AXIS 5400 is fully compatible with the HP JetAdmin and the HP Web JetAdmin printer management software. You can use either tool to install and configure your printer devices, and to monitor the current status of your AXIS 5400 and the connected printers.
Please refer to the appropriate Hewlett Packard documentation for further details about these tools.
Notes: ❏ To enable support for the HP JetAdmin and the HP Web
JetAdmin management software, you must set the
HP_JETADMIN parameter to YES.
❏It is not possible to upgrade the AXIS 5400 Flash Memory from the HP JetAdmin.
❏If the AXIS 5400 has been configured with HP JetAdmin or HP Web JetAdmin, you cannot configure it with AXIS NetPilot unless you first reset it to the factory default settings.
123
OS/2 Windows NetWare
UNIX Macintosh
