Axis Communications 5400 user manual Basic Queue-based printing Pure IP

AXIS 5400 User’s Manual Section 4: Setting Up - NetWare 41

Basic Queue-based printing (Pure IP)

Axis print servers with software version 6.0 or later allow users to print in a Pure IP environment using traditional queue-based printing. If you prefer using NDPS as your printing method, please refer to Setup using NDPS, on page 35.

In the NetWare Pure IP environment, you must use NetWare

Administrator to create the printer, print server and queue objects.

Installing the Follow the instructions below to install the AXIS 5400 in the NetWare AXIS 5400 Pure IP environment:

1.Start the Configuration Wizard from the User mode in the AXIS 5400 Web interface.

2.Click your way through the Wizard until reaching the NetWare page. Make sure that the PSERVER_NDS parameter is set. If you want to change the parameter value or if the parameter value is empty, enter the desired values. The parameter value must include the tree or the preferred file server you want to login to and the print server name including the context. The syntax of the PSERVER_NDS parameter is described in PSERVER_NDS parameter, on page 42.

3.Use NetWare Administrator to create and link the printer, print server and queue objects in the NDS tree.

4.Use the Add Printer Wizard to install the printer on your client. Note that only NDS queue based PSERVER printing is supported.

Any configuration and management of the AXIS 5400 can be performed from any standard Web browser. Please refer to Using a Web browser, on page 98.

In Pure IP environments, the AXIS 5400 supports NDS queue based

PSERVER printing or NDPS printing. Refer to Queue-based Printing

Methods, on page 43 alternatively Setup using NDPS, on page 35.

NetWare