
32 | Section 3: Basic Installation | AXIS 5400 User’s Manual |
|
|
|
NetWare
Using RARP in UNIX Follow the instructions below to set the IP address using RARP:
1.Append the following line to your Ethernet Address table. This is typically located in the /etc/ethers file:
<Ethernet address> <host name>
OS/2 Windows
UNIX Macintosh
Example:
00:40:8c:10:00:86 npsname
2.Update, if necessary, your host table and alias name databases, as required by your system.
3.If it is not already running, start the RARP daemon. This is typically performed using the rarpd
4.Restart the AXIS 5400 to download the IP address.
Notes: ❏ If the host name has not been mapped to an IP address, simply replace the host name entry with the IP address in the example above.
❏If you are using IBM AIX, you will probably not have access to a RARP daemon. If this is the case, you can use either the ARP or BOOTP methods instead.