Axis Communications user manual Installing the Axis 5400 in Ndps environments

36 Section 4: Setting Up - NetWare AXIS 5400 User’s Manual

NetWare

Installing the AXIS 5400 in NDPS environments

Having assigned an IP address to the AXIS 5400 as described in Assigning an IP address, on page 25, you are now ready to install the AXIS 5400 for NDPS printing. You can select to install the connected printers as public or controlled access printers. Follow the instructions below to install the AXIS 5400 using NDPS:

Notes: ❏ The HP-JETADMIN parameter of the AXIS 5400 must be set to YES in order for the communication between the AXIS 5400 and the NDPS gateway to be enabled.

❏If you do not have an NDPS Manager object available, start out with creating one in the NetWare Administrator.

Public Access To create a public access printer using the NDPS Manager object in your NetWare administrator, do the following:

1.Double-click on the NDPS Manager object you will be using to control the Printer Agents.

2.At the Identification page for the NDPS Manager, click the printer Agent List button. The Printer Agent List dialog will appear.

3.Click New. The Create Printer Agent dialog will appear.

4.Type a name of your choice in the NDPS Printer Agent field.

5.Choose the Axis Gateway configuration in the Gateway Type window. Select TCP/IP or IPX as transport protocol. (See Note below).

6.Click OK.

7.Once you have completed the required tasks, you are ready to print in your NDPS environment.

Notes: ❏ The Public Access print servers are immediately available for everyone on the network.