120 | Section 9: Management & Configuration | AXIS 5400 User’s Manual |
|
|
|
OS/2 Windows NetWare
UNIX Macintosh
Viewing the Status file
Performing resets
Telnet Help
The status command shows which printer port the logical printers are assigned to, and their current status.
Follow the instructions below to view the status file using telnet:
1. Log in to the AXIS 5400 by typing:
telnet <host name> or telnet <IP address> in a DOS windows (Windows and OS/2) or in a UNIX shell window.
2.Enter the user id and the password. (The default entries are root and pass.)
3.View the status file by typing:
status
Three types of reset commands allow you to perform soft resets, to perform hard resets, and to reset the print server’s parameters to its factory default settings.
Follow the instructions below to perform a soft reset using telnet:
1. Log in to the AXIS 5400 by typing:
telnet <host name> or telnet <IP address> in a DOS windows (Windows and OS/2) or in a UNIX shell window.
2.Enter the user id and the password. (The default entries are root and pass.)
3.Restart the print server’s protocols by typing:
softreset
Replace the command in step 3 above with hardreset or default to perform the other two reset operations.
By typing help in step 3 in any of the Telnet instruction sets above, a list of all available commands will be displayed.
