66 | Section 5: Setting Up - Windows | AXIS 5400 User’s Manual |
|
|
|
Windows 3.1 and Windows for Workgroups
Windows
Windows 3.1 In order to print to a network printer, Windows 3.1 requires the installation of network support, such as the LAN Server or LAN Manager Workstation software. When installed, proceed as described under Windows for Workgroups below.
Windows for
Workgroups
1.
2.In the Port menu, click Add.
3.In the NPS Port list, select the AXIS 5400 port. The port appears as <name>.LP1, where <name> is AX followed by the last six digits of the AXIS 5400 serial number, e.g. AX100086.
4.Accept or change the suggested Windows port name and type any required comment in the Description field. Make a note of the Windows port name as you will need this later, then click OK to install the Windows port.
5.In the Port menu, click Connect... to bring up the Windows Printers dialog.
6.Select a printer driver from the list of Installed Printers (or click Add>> to install a new driver), then click Connect...
7.Select the Windows port name from step 4 above (this name can be found at the bottom of the Ports list).
8.Click OK to close the Connect dialog, and Close to close Printers.
The setup is completed and you can now print through your
AXIS 5400.
