AXIS 5400 User’s Manual | Section 3: Basic Installation |
|
|
Assigning an IP address
To establish communication with the TCP/IP network, enabling TCP/IP printing and Web browser management, an IP address must be assigned to your AXIS 5400.
Before you start
System privileges You need root privileges on your UNIX system, or administrator privileges on a Windows NT server to set the IP address using RARP, BOOTP or DHCP.
Ethernet address You need to know the Ethernet address of your AXIS 5400 to perform the installation. The Ethernet address is based upon the serial number of your AXIS 5400. This means, for example, that an AXIS 5400 with the serial number of 00408C100086, will have the corresponding Ethernet address of 00 40 8C 10 00 86. The serial number is located on the bottom label of the unit.
IP address Unless you are downloading the IP address using DHCP, you must obtain an unused IP address from your network administrator.
Important: ❏ DO NOT use the IP addresses used in the following examples when installing your AXIS 5400. Always consult your network administrator before assigning an IP address to your AXIS 5400.
25
OS/2 Windows NetWare
UNIX Macintosh
