56 | Section 5: Setting Up - Windows | AXIS 5400 User’s Manual |
|
|
|
Windows
|
| 11. | Select the printer driver you want to install and click Next>. |
|
| 12. | Enter an appropriate name for your printer and click Next>. |
|
| 13. | Choose whether you want to share the printer with other network |
|
|
| users and click Next>. |
|
| 14. | Choose whether you want to produce a test page and then click |
|
|
| Finish. |
Using the Microsoft | This section describes how to set up a Windows NT Server v4.0 for | ||
LPD monitor with | LPR printing over the TCP/IP protocol, using the | ||
Windows NT 4.0 | LPD monitor. | ||
|
| If you have not already done so, you should perform the TCP/IP basic | |
Basic Setup | |||
|
| setup procedures prior to installing a printer for LPD printing. These | |
procedures are defined in Assigning an IP address, on page 25 and onwards.
Preparing for LPR/LPD printing
In the Control Panel, click the Network icon. If the TCP/IP Printing entry appears, then TCP/IP is already installed. Close the Network folder and skip to Installing a printer on the next page.
Follow the following steps to prepare for LPR/LPD printing:
1.Open the Control Panel and click the Network icon.
2.Select Protocols.
3.Add TCP\IP Protocol.
4.Select Services.
