Axis Communications 5400 user manual Windows NetWare, Windows and OS/2, OS/2 Unix Macintosh

30 Section 3: Basic Installation AXIS 5400 User’s Manual

Windows NetWare

Using ARP in Follow the instructions below to set the IP address using ARP:

Windows and OS/2

1. Start a DOS window.

2. Type the following commands:

arp -s <IP address> <Ethernet address> ping <IP address>

arp -d <IP address>

Example

arp -s 192.168.3.191 00-40-8c-10-00-86 ping 192.168.3.191

arp -d 192.168.3.191

OS/2

UNIX Macintosh

The host will return Reply from 192.168.3.191 ... or a similar message. This indicates that the address has been set and that communication is established.

Notes: ❏ When using the Windows 95 implementation of ARP, change the first line to:

arp -s <IP address> <Ethernet address> <w95host IP

address>, where <w95host IP address> is the IP address of your Windows 95 host.

❏When you execute the ping command for the first time, you will experience a significantly longer response time than is usual.

❏By using the arp -dcommand, the static entry in the arp table is removed from the host’s cache memory.