80 | Section 7: Setting Up - Macintosh | AXIS 5400 User’s Manual |
|
|
|
Setting Parameters In AppleTalk, you can change a limited number of the parameters of the AXIS 5400. You can:
•enable and disable binary data transfers for your printing
•select the type of binary transfer protocol to use
•specify the AppleTalk printer type
•set the IP address
Macintosh
However, by assigning an IP address to your AXIS 5400, you have access to all of print server’s parameters via any standard Web browser or via FTP. Refer to Section 9 Management & Configuration, on page 97 for more information.
Example: The following example describes the how you set the AXIS 5400 parameters in AppleTalk.
Important: DO NOT use the parameter values from this example when configuring your AXIS 5400. You should select values that are appropriate for your printers and network settings.
Follow the instructions below:
1.Open the Chooser.
2.Select a network printer driver, any LaserWriter will do.
3.Select the printer port which name ends with "_CFG".
4.Close the Chooser.
5.Open a text editor, e.g. SimpleText.
