62 | Section 5: Setting Up - Windows | AXIS 5400 User’s Manual |
|
|
|
Windows
Using the Microsoft This section describes how to set up a Windows NT Server
LPD monitor with v3.5 and v3.51 for LPD printing over the TCP/IP protocol, using the Window NT 3.5x
Basic Setup If you have not already done so, you should perform the TCP/IP basic setup procedures prior to installing a printer for LPD printing. These procedures are defined in Assigning an IP address, on page 25 and onwards.
Install the TCP/IP Protocol Stack
In the Control Panel, click the Network icon. If the TCP/IP Printing entry appears, then TCP/IP is already installed. Close the Network folder and continue with Installing a printer on the next page.
Follow these steps to install the TCP/IP protocol stack:
1.In the Control Panel, select Network.
2.Click Add Software...
3.Select “TCP/IP Protocol and related components” and then click Continue.
4.Check “TCP/IP Network Printing Support” and then click Continue.
5.Select path and then click Continue.
6.Click OK in the Network Settings dialog box.
