
AXIS 5400 User’s Manual | Appendix A: Test Button | 137 |
|
|
|
Appendix A Test Button
The test button is located on the front right hand side of the AXIS
5400 and is used for:
•Printing a test page, checking the connection to the printer.
•Printing a parameter list, showing the AXIS 5400 current settings.
•Resetting the AXIS 5400 parameters to the factory default settings.
The Test Page Press the test button once to print a test page. If the test page prints, the parallel interface is functioning correctly. The printed Test Page contains basic information about the AXIS 5400. It is recommended that you print a test page every time you have connected the AXIS 5400 to a printer.
The Parameter List Press the test button twice to print a parameter list showing the current AXIS 5400 settings. This list provides comprehensive details of all the parameters and their current status. Refer to
B - The Parameter List, on page 139.
If you want to change any of the parameters, use one of the methods that are described in
Section 9 Management & Configuration, on page 97.
OS/2 Windows NetWare
UNIX Macintosh