Axis Communications 5400 user manual Upgrading the Firmware Software, OS/2 Macintosh

134 Section 11: Upgrading the Software AXIS 5400 User’s Manual

Windows NetWare

Upgrading the Firmware Software

You can upgrade the AXIS 5400 Flash memory using one of the following methods:

• AXIS ThinWizard (TCP/IP)

• FTP (TCP/IP)

•AXIS NetPilot Upgrade Wizard (IPX/SPX)

Note: ❏ Updating instructions are also supplied with the software update.

OS/2

Macintosh

Upgrading using AXIS ThinWizard is a tool that enables batch upgrading of several AXIS ThinWizard print servers and should be used for upgrading the flash memory in

TCP/IP networks.

You must assign the AXIS 5400 with an IP address, as described in Assigning an IP address, on page 25, before you can use this upgrading method.

Follow the instructions below to upgrade your print servers using

AXIS ThinWizard:

UNIX

1.Click the Manage Network button in the AXIS ThinWizard main menu.

2.Select a network group from the drop-down list. You can only update the servers that are included in the selected network group.

3.All AXIS servers included in the network group appear. Click the Firmware button to start the Upgrade Wizard.

4.Follow the instructions that are presented to you to complete the installation.

Refer to Using AXIS ThinWizard, on page 103, for more information about AXIS ThinWizard.